Loading...
 Start Page
Language selection: English Deutsch Français
Language selection: English Deutsch Français
 
 
Snow plough controllers
 
x

Compact snow plough controller with pressure control function

If a carrier vehicle does not have the necessary hydraulic functions, a large number of control variants can be supplied. If the carrier vehicle is equipped with a hydraulic system, a control valve block can be fitted to the snow plough for the necessary functions. If there are no hydraulics, there is an option to install a completely autonomous hydraulic system. Only a power supply from the carrier vehicle is required for this.

ZAG 107

This controller is designed for versatilit and is available for 12 or 24 V operations. It can be fitted to any kind of vehicle.

ZRS 102

The ZRS-102 controller is equipped with two function levels. The blade pressure regulation for load relief or load application is infinitely adjustable via a scale value. The control function can be switched to the floating position function by means of a key function.

ZRS 202

The two-joystick operation of the ZRS 202 is ideally suited for the joint use of front and side blades. The blade pressure regulation for load relief or load application is infinitely adjustable via a scale value. The control function can be switched to the floating position function by means of a key function.

ZRS 112

Enables the front snow plough to be controlled in proportion to the joystick movements. Various additional functions can be operated via a second level.

Send us your enquiry electronically by email or contact us right now by phone: +41 (0)34 491 81 11

Copyright © 2021 - 2024 ZAUGG AG EGGIWIL