The autonomous ZAUGG Monobloc snow blower units for wheel loader application are a cost-effective and efficient alternative to the self-propelled single-purpose snow blowers. These Monobloc units are manufactured in various sizes with widths of 2.0-3.3 m and power outputs of 110–600 HP. The units can be fitted by one person to the hydraulically lockable quick-mount couplings of the wheel loader with little effort or are alternatively attached to the carrier arms. As the Monobloc units are completely autonomous, the connecting cable must simply be plugged into the control panel (with engine monitor and freely placeable joystick) installed in the driver’s cab of the wheel loader. This enables the wheel loader to be equipped with other devices such as the ZAUGG snow plough, ice scraper, snow shovel, bucket-loader, etc. within a very short time. By means of the combination of the wheel loader with snow clearance devices, this construction machine can still be economically used during the winter break, thus saving times of non-use. The articulated or four-wheel steering provides the wheel loader with the Monobloc unit with good manoeuvrability and operational capability even in confined spaces such as in narrow, deep paths, for example. As the carrier arms can be lifted extremely high, snow clearing in steps is possible. All snow blowers are built according to the proven dual-stage system with cutter reels and impeller. Overload protectors are installed to protect the cutter reels against breakage.
The ZAUGG Monobloc snow blowers are high-quality Swiss products, which have proven themselves in worldwide practical applications and which have over-average performance and safety characteristics. And above all have a corresponding positive influence on the cost/benefit ratio of the wheel loader.
Monobloc Snow blower Mobl 110 with SF72-70 KS | |
---|---|
Antriebsgruppe | |
Engine | Cummins |
Type | QSB3.3 |
Exhaust emission standard | EU Stage IIIB / US EPA Tier 4i |
Cylinders | 4 in line |
Output | 82 kW (110 PS) |
Diesel fuel tank | 100 l |
Snow blower unit SF 72-70-L-000 KS | |
Working widths | 200/220/246/270 cm |
Clearing height | 100 cm |
Cutter reels ∅ | 72 cm |
Impeller ∅ | 70 cm |
Protection | Shear pin coupling/automatic cut-out clutches |
Ejection chutes | 1-flap, steel / 2-flap, steel / 4-flap, INOX |
Ejection range | up to 45 m, depending on the selected transmission option: short, medium or long |
Clearing capacity | up to 1000 t/h (at approx. 15 m) |
Weight | |
Total weight | approx. 2250-2450 kg (depending on the model) |
Necessary static tipping load of the wheel loader | |
Minimum | approx. 4000-4400 kg (depending on the model) |